Polymer Industries : Densetec HMW

Polymer Industries' Densetec HMW is the extruded material needed when Densetec HDPE is not enough and Polyslick UHMW™ is not necessary. Densetec HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.

FEATURES COLORS GALLERY SIZES APPLICATIONS
FINISHES MSDS SELL SHEET TYPICAL PROPERTIES

Noise reduction
Low temp properties
Good sliding qualities
Stress crack resistant
RoHS & REACH compliant

Moisture resistant
Low coef of friction
High impact strength
Excellent wear resistance
Excellent chemical resistance


*Natural	White with silicone	Black
*FDA approved colors

STANDARD:	Extruded inch / mm	Compression Molded inch / mm
Thickness	0.03 - 1 / 0.8 - 25	Not a Standard Product
Sheet Size	48 x 96 / 1220 x 2440 48 x 120 / 1220 x 3050	Not a Standard Product


CAPABILITIES:	Extruded inch / mm	Compression Molded inch / mm
Thickness	0.03 - 1.25 / 0.8 - 32	0.5 - 4 / 12.7 - 100
Width	45 - 144 / 1140 - 3655	48 - 96 / 1220 - 2440
Length	Up to 480 / 12200	Up to 240 / 6100

Bins
Hoppers
Ice Rink Floors
Reclaim Hoppers
Wear Applications

Chutes
Conveyors
Silo Liners
Truck Liners
Vibratory Feed Pans

Scrapers
Dock Fenders
Snow Plow Liners
Fertilizer Spreaders
Various Machine Parts

		standard extruded finish
Smooth
		standard compression molded finish
Planed
Note: Other sizes, colors, formulations and forming grade available upon request